Table of Contents
Advertisement
EMI Shield, Video Board, and Palm Rest: Dell Latitude V710/V740 Service Manual
Palm Rest
NOTICE:
Disconnect the computer and any attached devices from electrical outlets, and remove any
installed batteries.
NOTICE:
To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted
metal surface on the computer.
NOTICE:
Read
"Preparing to Work Inside the
procedure.
1. Remove the keyboard.
NOTICE:
You must remove the display assembly before you remove the palm rest; the display hinges
pass through the back of the palm rest.
2. Remove the
display
3. Remove the
EMI
4. Remove the
video
5. Remove the two M2.5 x 5-mm screws from the top of the palm rest.
1
M2.5 x 5-mm screws (2)
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/...40/v710%20v740%20SERVICE_MANUAL/palmrest.htm (9 of 11)6/21/2004 2:57:05 AM
assembly.
Shield.
board.
Computer" before performing the following
Advertisement
Table of Contents
