Table of Contents
Advertisement
Display Assembly and Display Latch: Dell Latitude V710/V740 Service Manual
1
M2.5 x 5-mm screws (4)
2
hinge blocks (2)
3
M2.5 x 5-mm screws (2)
4
display-feed flex cable
5
pull tab
6. Pull up on the pull tab that is attached to the display-feed flex cable connector to remove the connector
from the system board.
7. Remove the two M2.5 x 5-mm screws from each hinge block.
8. Lift the display assembly up and out of the bottom case.
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/L...V740/v710%20v740%20SERVICE_MANUAL/display.htm (3 of 8)6/21/2004 2:57:02 AM
Advertisement
Table of Contents
