Table of Contents
Advertisement
Display Assembly and Display Latch: Dell Latitude V710/V740 Service Manual
1
screw covers (5)
2
M2.5 x 5-mm screws (5)
3
display bezel
4
display panel
5
M2.5 x 5-mm screws (2)
Removing the Display Bezel
NOTICE:
Disconnect the computer and any attached devices from electrical outlets, and remove any
installed batteries.
NOTICE:
To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted
metal surface on the computer.
NOTICE:
Read
"Preparing to Work Inside the
procedure.
1. Remove the keyboard.
2. Remove the
display
3. Use a plastic scribe to pry the five screw covers out of the screw holes located on the front of the bezel.
4. Remove the five M2.5 x 5-mm screws located on the front of the bezel.
NOTICE:
Carefully separate the bezel from the top cover to avoid damage to the
bezel.
5. Starting at the bottom of the display panel (by the Dell™ logo), use your fingers to separate the bezel from
the top cover by lifting the inside of the bezel while pushing in on the outside.
Removing the Display Panel
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/L...V740/v710%20v740%20SERVICE_MANUAL/display.htm (4 of 8)6/21/2004 2:57:02 AM
6
M2 x 3-mm screws (4)
7
M2.5 x 5-mm screw (1)
8
display-feed flex cable
9
flex-cable retention bracket
10
top cover
assembly.
Computer" before performing the following
Advertisement
Table of Contents
