Replacing The Video Graphics Board; Palmrest Assembly - Dell Latitude C810 Service Manual

Removing and Replacing Parts : Dell Latitude C810 Service Manual
4. Detach the display flex cable
5. Remove the three 8-mm screws that secure the video graphics board.
6. Separate the video graphics board from the system board connector.

Replacing the Video Graphics Board

1. Align the three screw holes and press down firmly on the word "Dell" to seat the board in its
connector.
NOTICE: Make sure the board is correctly and firmly seated before continuing. Failure to do so
will cause intermittent video failures.
2. Replace the three screws.

Palmrest Assembly

NOTICE: Disconnect the computer and attached devices from electrical outlets and remove any
installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by periodically
touching unpainted metal on the computer.
Palmrest Assembly
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/L...Latitude/C810/C810_SERVICE_MANUAL/2e40520.htm (29 of 46)6/21/2004 1:32:50 AM
from the strain relief and the graphics card.