Dell Latitude C810 Service Manual page 26

Removing and Replacing Parts : Dell Latitude C810 Service Manual
2. Remove the 6-mm screw that secures the display flex cable to the strain relief, and then use
the pull loop to remove the display flex cable from the graphics card.
NOTICE: When reconnecting the flex cable, press down on both ends of the connector, not in
the middle. Pressing the middle of the connector can damage fragile components.
3. Open the display and, from the back of the computer, remove the two screws labeled with a
"circle D" that secure the display assembly to the bottom case assembly.
4. With the display in an upright position, lift the display assembly from the bottom case
assembly.
Display Assembly Bezel and Panel
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/L...Latitude/C810/C810_SERVICE_MANUAL/2e40520.htm (18 of 46)6/21/2004 1:32:50 AM