Removing The Memory Modules; Replacing The Memory Modules - Dell Latitude C810 Service Manual

Removing and Replacing Parts : Dell Latitude C810 Service Manual

Removing the Memory Modules

1. Remove the memory module
2. To release a memory module from its socket, spread apart the tabs at each side of the module
until the module pops up slightly.
3. Lift the memory module out of its socket.

Replacing the Memory Modules

1. If you only have one memory module, install it in the socket labeled "DIMM A." Install a second
memory module in the socket labeled "DIMM B."
NOTE: Memory modules are keyed to fit into their sockets in only one
direction.
2. Insert the memory module's edge connector into the socket slot at a 45-degree angle and press
the module firmly into the slot.
3. Pivot the module down until it clicks into place. If you do not hear a click, remove the module
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/L...Latitude/C810/C810_SERVICE_MANUAL/2e40520.htm (7 of 46)6/21/2004 1:32:49 AM
cover.