Adjusting The Balance; Adjusting The Fader; Setting The Subwoofer - Clarion CZ509A Owner's Manual

Basic Operations
When "CUSTOM" is set:
3-1. Press the [ ] button.
3-2. Press the [x] or [v] button to select the
"BASS, MID" or "TREBLE" mode to adjust.
3-3. If you want to set the flat, press the [
button to return to the "CUSTOM" mode,
then press and hold the [
1second or longer, bass/mid/treble
characteristics become flat.
When "EXCITE/IMPACT/B-BOOST" is set:
3-1. Press the [ ] button.
3-2. Press the [ ] or [
setting in the range of
∗ The factory default setting is "0".
3-3. Press the [ ] button to return to the
previous mode.
● Adjusting the BASS/MID/TREBLE
This adjustment can be performed only when
the BEAT EQ is set to "CUSTOM".
Note:
• While connected with the external amplifers,
please do not set the "BASS/MID/TREBLE" in the
maximum level. Otherwise the speakers may be
damaged.
3-1. Press the [ ] button.
3-2. Press the [x] or [v] button to select as
following order.
"BASS<G>" ↔ "BASS<F>" ↔
"BASS<Q>" ↔ "MID<G>" ↔ "MID<F>" ↔
"MID<Q>" ↔ "TREBLE<G>" ↔
"TREBLE<F>" ↔ "TREBLE<Q>"
∗ The factory default setting is "BASS G".
3-3. Press the [ ] or [
setting.
BASS<G>:The factory default setting is "0".
(Adjustment range: +7 to
BASS<F>: The factory default setting is "50".
(Adjustment range: 50/100/200)
BASS<Q>:The factory default setting is "1".
(Adjustment range: 0.7/1/1.4/2)
MID<G> : The factory default setting is "0".
(Adjustment range: +7 to -7)
MID<F> : The factory default setting is "500".
(Adjustment range: 500/1K/2K)
MID<Q> : The factory default setting is "1".
(Adjustment range: 0.7/1/1.4/2)
12
CZ509A
]
] button for
] button to adjust the
3 to +3.
–
] button to select the
– 7)
TREBLE<G>:The factory default setting is "0".
(Adjustment range: +7 to -7)
TREBLE<F>:The factory default setting is
"10K".
(Adjustment range: 5K/10K/15K)
TREBLE<Q>:The factory default setting is "1".
(Adjustment range: 0.7/1/1.4/2)
3-4. Press the [ ] button to return to the
previous mode.
● Setting the MAGNA BASS EXTEND
The MAGNA BASS EXTEND does not adjust
the low frequencies like the normal sound
adjustment function, but emphasizes the deep
bass frequencies to provide you with a dynamic
sound.
∗ The factory default setting is "OFF" (off).
2-1. Select "M-B EX".
3-1. Press [ ] or [
"OFF".
● Adjusting the balance
2-1. Select "BALANCE".
3-1. Press the [ ] or [
balance of the right and left speakers.
∗ The factory default setting is "CENTER"
(center). (Adjustment range: RIGHT12 to
LEFT12 (right 12 to left 12))
● Adjusting the fader
2-1. Select "FADER".
3-1. Press the [ ] or [
balance of the rear and front speakers.
∗ The factory default setting is "CENTER"
(center). (Adjustment range: FRONT12 to
REAR12 (front 12 to rear 12))
● Setting the subwoofer
You can set the low pass filter of subwoofer.
2-1. Select "LPF".
3-1. Each time press the [
select the setting, the setting changes in
the following order:
"THROUGH" ↔ "60" ↔ "90" ↔ "120"
∗ The factory default setting is
] button to select "ON" or
] button to adjust the
] button to adjust the
] or [ ] button to
"THROUGH ".