Advertisement
l
i
AND POWER LEVELSELECTION
HANDLEON/OFF SWITCH
(STANDARDMODEL)
To start the
vacuum cleaner,
slide the On/Off
Switch from the
OFF position to the
ON position. To
stop the vacuum
cleaner, slide the
On/Off Switch to
the OFF position.
BODY ON/OFF SWITCH
(OPTIONALMODEL)
On/Off
Sw_ch _
I
wer _
Handle
To staff the
vacuum
cleaner,
put the switch on
the top of the
body in the ON
position. To stop
the vacuum
cleaner, put the
switch in the OFF
position.
TWO SPEEDS
(OPTIONAL MODEL)
To staff the vacuum
cleaner, slide the
Two-Speed On/Off
Switch to the LO or HI
position. Use the LO
(center position) to
clean lightweight
rugs. Use the
HI
(bottom
position) to
clean most carpeted
floors. Use the OFF
(top position] when
leaving or storing the
cleaner.
To stop the vacuum,
slide the Two-Speed On/Off
Switch to the OFF position.
ATTACHMENTS
Identify each of the attachments shown below.
w
Dandusting
Collar
Stretch Hose
ToUseAttachments:
Remove the lower end of the stretch hose from the
cleaner by grasping the hose collar, twisting and pulling
straight up.
NOTE:Brush
assembly stops
revolving and the
headlight goes off
when hose is
removed.
Stretch
Hose
Hose
Collar
WARNING
PersonalInjuryHazard
Always unplug vacuum before placing hands near
brushassembly as brushmay suddenlyre-start
Failureto do so could resultin injury.
7
Advertisement
