Advertisement
To Store Attachments:
Remove dusting brush or upholstery tool. Snap into
appropriate
storage location.
Remove crevice tool from the wand by twisting.
Lay aside.
Unlock the wand by turning the wand locking ring to the
UNLOCKposition.
___
Lower
//'-.\
w"°
nlock_
i
Locking Ring
\ \
/
Upper
Wand
Slide
the lower wand into the
upper wand. Turn the
wand locking ring to
the LOCK position.
Place the crevice tool down
into the compressed wand.
Snap into the appropriate storage location.
Be sure the unit isturned off. Reinsert the hose fully into
the opening on the lower body from which it was
removed
Pressfirmly to assure connection.
NOTE:Brushassembly will not turn if hose is not fully
inserted.
Personal Injury Hazard
DO NOT place hands or feet underneath the unit
when inserting the hose. The brush assembly begins
to revolve rapidly when the vacuum is turned on and
is switched to a carpet height setting.
EXTENSION HOSE
NOT INCLUDED IN ALL MODELS
The stretch hose attached
to the vacuum cleanler
has two "J" shaped slots in the end where attach-
ments fit into.
Unit Hose
Extension Hose
The extension hose has two tabs on the end that can
be pushed into the slots and twisted to attach
the
two hoses together.
Attachments
and the telescoping
wand can be
attached
to the other end of the extension hose for
additional
reach.
!f your mode
did not come with an extension
hose,
one can be purchased
at any SEARSre +n'' *+ore
under part number 20-52571.
CAUTION
When using the regular hose or with the extension
hose attached, the cleaner should be on a solid
surface on the same level or below the level of the
user's feet. DO NOT use the hoses when the cleaner is
above the level of the user's feet.
ATTACHMENT U SECHART
CLEANING
AREA
Between
ATTACHMENT
Furniture*
Cushions*
Drapes*
Stairs
Walls
DUSTING BRUSH
X
X
X
CREVICE TOOL
X
X
X
FABRIC BRUSH
X
X
X
*Always clean attachments
before using on fabrics.
9
Advertisement
