Advertisement
BULB CHANGING
WARNING
Electrical Shock Or Personal Injury Hazard
Disconnect electrical supply before servicing or
cleaning the unit. Failure to do so could result in
electrical shock or personal injury from cleaner
suddenly starting.
Disconnect
the power cord from the electrical
outlet,
Body
Base Screw
Base Cover
Press the handle
release pedal to
let the upper
portion of the
cleaner lay back
against the floor.
Locate the base
screw which
attaches
the
base cover to
the base.
Remove the base
screw.
CAUTION
Place hands on the sides of the base cover so that
your fingers extend to grasp the lower edge of the
base cover.
Gently pull
the base
cover away
from the base
and lift up,
Lay the base
cover aside.
Base Cover
Lift the
protective
shield, To
release the
light bulb,
carefully push
the bulb in and
turn to the left.
To Release
To replace the light
bulb (#20-5240),
carefully insert and
turn it to the right,
CAUTION: Do not plug
in or turn on until the
vacuum
is completely
reassembled.
Replace the base screw.
Handle
Release
Pedal
Pull the light bulb to
remove,
CAUTION: Replace the
light bulb with the same
or smaller wattage
size
to prevent possible
damage
to surrounding
parts.
Replace the
base cover
over the
base. P_ess
down fi!mly
so the aover
snaps onto
the bas_.
Upp_pr
Body
EZase _crew
--
Base Co_r
Do not operate the cleaner withoutthescrew in
place. Do not overtighten.Overtighteningcould $trip
the screwhole.
19
Advertisement
