6. Unfold the duplex guide fully.
7. While pushing the fuser lever to the right, open
the fuser door.
NOTICE: Ensure that to unfold the duplex
guide before opening the fuser door or you may
damage the fuser door.
Service Manual
Alignment and Troubleshooting
8. Pull the jammed paper out.
If the jammed paper does not move when you
pull, push the two blue pressure levers up to
loosen the paper, and then remove it.
9. Return the levers, fuser door, and duplex guide
to their original position.
10. Close the rear door.
11. Open and close the front cover.
Printing automatically resumes.
4-13