Cisco DPC User Manual page 23

Accessing the Residential Gateway
You must access the WebWizard in order to configure the residential gateway. To
gain access to the WebWizard, use the web browser on the PC attached to the
gateway and complete the following steps.
1 Open the web browser on your PC.
2 Type the following IP address and then select Go:
http://192.168.0.1.
3 The web browser accesses the WebWizard and displays the default About Your
Modem page. This page displays information about your cable modem along
with a series of tabs for accessing other WebWizard configuration and operation
features.
About Your Modem Page Description
The following table provides a description of each field within the About Your
Modem page.
Field Name
Name
Modem Serial Number
Cable Modem MAC
Address
Hardware Version
Receive Power Level
Transmit Power Level
4024320 Rev A
How Do I Configure My DOCSIS Residential Gateway?
Description
The name of the residential gateway
A unique sequential series of alphanumeric
characters provided to every modem during
manufacturing
A unique alphanumeric address for the cable
modem coaxial interface, which is used to connect
to the cable modem termination system (CMTS) at
the headend. A media access control (MAC)
address is a hardware address that uniquely
identifies each node of a network
Identifies the revision of the circuit board design
The input level of the downstream CMTS carrier
Indicates the upstream power level
23