Front Panel Led Status Indicator Functions - Cisco DPC User Manual

Front Panel LED Status Indicator Functions

Front Panel LED Status Indicator Functions
Initial Power Up, Calibration, and Registration (AC Power applied)
The following chart illustrates the sequence of steps and the corresponding
appearance of the residential gateway front panel LED status indicators during
power up, calibration, and registration on the network when AC power is applied to
the residential gateway. Use this chart to troubleshoot the power up, calibration, and
registration process of your residential gateway.
Note: After the residential gateway completes registration, the modem proceeds
immediately to Normal Operations. See Normal Operations (AC Power applied) (on
page 107).
Front Panel LED Status Indicators During Initial Power Up, Calibration, and Registration
Step:
Front Panel
Indicator
1 POWER
2 DS
3 US
4 ONLINE
5 LAN1-
LAN4
6 WIRELESS
106
1 2 3
Self Downstream Downstream
Test Scan Signal Lock
On On On
On Blinking On
On Off Off
On Off Off
On On or On or
Blinking Blinking
Off On or On or
Blinking Blinking
High Speed Data Registration
4
Ranging
On
On
Blinking
Off
On or
Blinking
On or
Blinking
5 6
Requesting Request High
IP Address Speed Data
Provisioning
File
On On
On On
On On
Off Blinking
On or On or Blinking
Blinking
On or On or Blinking
Blinking
4024320 Rev A