Chapter 3 Command Reference; Setrci; Name; Synopsis - Fujitsu SPARC Enterprise M3000 Rci User's Manual

CHAPTER 3 Command Reference

1
3.1

setrci

• NAME

setrci - configure or display the environment of the remote cabinet interface (RCI)

• SYNOPSIS

setrci -c stat
setrci -c init [-s RCI_network]
setrci -c set host_no
setrci -c initconfig [-s RCI_network]
setrci -c addconfig [-s RCI_network]
setrci -c replaceconfig [ RCI_address]
setrci -c ledon RCI_address
setrci -c ledoff
setrci -c idpin
setrci -h

• DESCRIPTION

The setrci(8) command configures or displays information that accompanies the
initial setting and maintenance of the RCI environment.
The following can be set or displayed:
stat
init
set
initconfig
C120-E360-06EN
Displays the status of the RCI network.
Initializes the RCI setting. Initialization is only performed for the host
that executes the command. If there are other hosts connecting to the
RCI, initialization must be performed for each host.
Sets an RCI address. Use this specification when the RCI setting has been
initialized. After the setting, "-c initconfig" or "-c addconfig" must be
executed.
Makes the RCI setting on the first host. An RCI I/O unit connected via
RCI is searched for and found, and then an RCI address is assigned.
3-1