Clear Memory; Nmea - Magellan MobileMapper - GPS Software User Manual

17.Clear Memory

This option allows you to clear one of the following data
sets from MobileMapper Pro's memory:
- Track history: This feature is disabled in MobileMapper
Pro
- Wpts/Routes: Will clear all waypoints and routes from
memory
- Routes: Will clear all routes from memory
- Reset default: Will reset the receiver by restoring all fac-
tory defaults
- All: Will clear all memory
After selecting the Clear Memory option from the Setup
menu, use the up/down arrow to highlight the desired
choice and then press ENTER. MobileMapper Pro will ask
you to confirm your choice. If you have selected All,
MobileMapper Pro will then shut off. The next time it is
turned on, it will prompt you that it needs to be initialized.

18.NMEA

This option allows you to select the NMEA message that
will be output from MobileMapper Pro. Your choice will
depend on which message is needed by the device con-
nected to MobileMapper Pro:
- V1.5 APA: Autopilot Sentence "A"
- V1.5 XTE: Crosstrack error according to NMEA0183
V1.5
- V2.1 GSA: Standard GPS position message according to
NMEA0183 standard in version 2.1. The GSA mes-
sage strings include GGA positions - the most com-
monly sought NMEA messages. If you have any doubt
as to which NMEA option to select, the GSA option is
usually what you want.
After selecting the NMEA option from the Setup menu, use
the up/down arrow to highlight the desired choice and
then press ENTER.
69