Other Functions Tied To Routes - Magellan MobileMapper - GPS Software User Manual

54

3. Other Functions Tied to Routes

You can also do the following on the highlighted route using
the functions available from the MENU button (see also dia-
gram on page 59):
- Viewing the route on the Map screen by highlighting the
Map View Route option and pressing ENTER. The Map
screen then appears showing the route. Press ESC to
come back to the Route List screen.
- Editing the route by highlighting the View/Edit Route option
and pressing ENTER. From the View/Edit screen you can
then press the MENU button to access options allowing
you to insert, delete, replace the highlighted waypoint and
then to save the changes made to the route.
- Reversing the route, i.e. reversing the direction of travel
along the route, by highlighting the Reverse Route option
and pressing ENTER. This instantly reverses the route.
Note that the first and last waypoints in the route name
have been swapped.
- Deleting the route by highlighting the Delete Route option
and pressing ENTER. A message will appear asking you to
confirm this operation.
- If a route has been activated, selecting the leg you want to
follow by selecting the Select Leg option and pressing
ENTER. The screen then shows the list of points making
up the route. Select the point you want to navigate to and
press ENTER. A warning message will appear asking you
to confirm the leg change. After choosing Yes or No, press
ESC twice to return to the navigation screen.