Routes; Goto Route; Multi-Leg Route; Creating A Multi-Leg Route - Magellan MobileMapper - GPS Software User Manual

A GOTO route is a one-
leg route whose two
ends are your current
position and the cho-
sen destination point.
WPT6
WPT5
WPT4
WPT3
WPT2
WPT1
52

Routes

As explained below, MobileMapper Pro can handle two types
of routes: GOTO route and multi-leg route.

GOTO Route

This in fact a route that you define when:
- You select a feature on the Map screen, you press ENTER
to display the attributes of this feature, and you press
ENTER again to enable the Goto function to this feature
(by default, the Goto field at the bottom of the screen is
highlighted). The same can be done to choose a POI or a
waypoint as the destination point.
- You use the GOTO option from the Menu screen and you
choose a POI or waypoint as the destination point.
GOTO routes are not saved in memory. When you turn your Mo-
bileMapper Pro off and then back on, the GOTO route is gone.
You need to create a new GOTO route if you intend on com-
pleting the route.

Multi-leg Route

A multi-leg route consists of several waypoints or POIs that
you should reach one after the other. The segment between
any two consecutive waypoints or POIs is called a "leg." Un-
like GOTO routes, multi-leg routes can be stored in memory.

1. Creating a Multi-leg Route

Press NAV to display a navigation screen, press MENU, scroll
down to Routes and press ENTER.
The Route List screen is now displayed. Scroll down the list
and highlight the first Empty route in the list. Press ENTER.