Using The Web Menu - Sony PMW500/HD02 Supplement Manual

Solid-state memory camcorder
Hide thumbs Also See for PMW500/HD02:
Table of Contents

Advertisement

Encryption (data encryption): Depending
the settings on the computer, Disable,
WEP, TKIP or AES
WEP Key Index (key index): 1 when
Encryption is set to [WEP]
Input Select (key input format): Depending
the network key (or security key),
ASCII5, ASCII13, HEX10 or HEX26
when Encryption is set to [WEP],
ASCII8-63 or HEX64 Encryption is set
to [TKIP] or [AES]
7
Set the Key item to the network key (or
security key) set on the computer and
press the MENU knob.
8
Set the Set item to [Execute] and press
the MENU knob.
The message "Wi-Fi Setting Executing..."
appears and the camcorder starts connection.
If the connection to the computer is
complete, then the message changes to "Wi-
Fi Setting OK".
Black squares appear in the Wi-Fi Status
column to show the connection status. (The
number of squares shows the level of
connection status.) In the Wireless Mode
column, the IEEE802.11 standard of the
established connection appears (802.11b,
802.11g or 802.11n).
Tip
It is also possible to make a connection by accessing a
network connection started on the camcorder from the
computer.
To terminate the connection
Terminate the connection on the computer.
To revert to the default settings (reset)
If you have trouble making a connection, or you
want to start over, you can reset your Wi-Fi
connection settings to their defaults.
Set MAINTENANCE >Network Setting >Net
Config Reset in the setup menu to "Execute" and
press the MENU knob.
If the reset is executed, the message "Net Config
Reset Done" appears.
The camcorder attempts to connect to the network
using a MAC address as the SSID
To make a connection in infrastructure
mode
Setting up the wireless LAN access point
The following settings are required.
• Network ID (SSID)
• Encryption method
• Network key (Key)
For details about setting up the wireless LAN access
point.
To find and connect to a wireless LAN from the
camcorder
Perform the same procedure in "To make a
connection in ad hoc mode" (page 20) excluding
the following.
• Do not perform steps 1 and 2.
• The settings made in step 7 change as follows.
SSID (network name): Selected network
connection name
Network Type (connection mode): Infra
Ch (channel): Auto
Authentication (network authentication):
Depending the settings on the computer,
Open, Shared, WPA or WPA2
Encryption (data encryption): Depending the
settings on the computer, Disable, WEP,
TKIP or AES
WEP Key Index (key index): 1 when
Encryption is set to [WEP]
Input Select (key input format): Depending
the network key (or security key), ASCII5,
ASCII13, HEX10 or HEX26 when
Encryption is set to [WEP], ASCII8-63 or
HEX64 Encryption is set to [TKIP] or
[AES]

Using the Web Menu

You can operate the Web menu built in the
camcorder from a computer when it is connected
to the camcorder via a Wi-Fi connection.
Using a Wi-Fi Adapter
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pmw-500

Table of Contents