Table of Contents
Advertisement
Using a Wi-Fi Adapter
Mounting an optional CBK-WA01 Wi-Fi
Adapter on this camcorder allows a Wi-Fi
connection between a computer and the
camcorder.
For details about the CBK-WA01, refer to the
Mounting Instructions and Operating Instructions
supplied with the CBK-WA01.
Making a Wi-Fi connection between a computer
and the camcorder enables you to do the
following.
• Send planning metadata created on a computer
to the camcorder, and set names of clips to shoot
and shot marks for shooting.
• Send files including clips from the camcorder to
a computer, and edit them at the shooting
location.
• Send audio and video proxy data to a computer
and logs it while you are shooting (see page 23).
Notes
• Check the firmware version of your camcorder to
make sure that the camcorder supports the Wi-Fi
adapter.
For details, contact your Sony dealer or your Sony
service representative.
• In order to use the Wi-Fi connection feature, you must
install an optional CBK-UPG01 Installation Key.
When installing the CBK-UPG01, refer to the
INSTALLATION MANUAL and INSTALLATION
GUIDE supplied with the CBK-UPG01.
Fixing the CBK-WA01
Notes
• Before attaching or removing the CBK-WA01, turn
the power of the camcorder off.
• It may be impossible to stow the camcorder attached
with the CBK-WA01 in a carrying case.
1
Attach the Wi-Fi adapter fixing bracket
to the camcorder, and fix the bracket
with the supplied three screws (A: +B
M3×6 screw, B: +B M2.6×5 Type1
screws).
Wi-Fi adapter fixing bracket
2
Insert the protrusion on the backside of
the CBK-WA01 into the hole on the
bracket, and tighten the screw to fix the
CBK-WA01 to the bracket.
3
Connect the cable of the CBK-WA01 to
the external device connector on the
camcorder, and store the excess length
of the cable in the cable holder.
Using a Wi-Fi Adapter
19
Advertisement
Table of Contents
