Balance Memory; Selection Of The Gain, Color Temperature, And White Balance Memory; Selection Of A Lens File - Sony F23 Operation Manual

Select one of the ND:1 to ND:5 filters at 1 .
The type of the filter selected at 1 is displayed at 2 .
If CC:E is selected at 3 , the sum of the ND values of the
filters selected at 1 and 3 is displayed at 2 .
Select one of the CC:A to CC:E filters at 3 .
The color temperature corresponding to the filter selected
at 3 is displayed at 4 .
If CC:E is selected, the correction value of the ND filter
that is selected on the ND side is halved.
Example: In a case where ND:3 and CC:E are selected, the
ND value is equivalent to 1/32ND.
The electrical gain 5600K selection has no effect on the
display at 4 .
3-2-5 Selection of the Gain, Color
Temperature, and White Balance
Memory
The setting items and values in Cine mode and Custom
mode are different.
In Cine mode: Select the gain and color
temperature
Gain/color temperature selection page
0dB
TUNGSTEN
On the first line, the gain value is selected from among the
following: –3 dB, 0 dB, 3 dB, 6 dB, 9 dB, and 12 dB.
On the second line, the color temperature is selected from
TUNGSTEN or DAYLIGHT.
With DAYLIGHT, the electrical gain 5600K is ON.
At shipment, the gain is set to 0 dB, and the color
temperature is set to TUNGSTEN.
The white balance adjustment value is fixed at the preset
value (3200K).
In Custom mode: Select the gain, color
temperature, and white balance memory
Gain/color temperature/white balance memory
selection page
0dB
5600K-ON
1
W:P
2
On the first line, the gain value is selected from among the
following: –3 dB, 0 dB, 3 dB, 6 dB, 9 dB, and 12 dB.
At 1 on the second line, the electrical gain D5600K can
be switched ON or OFF.
At 2 on the second line, the white balance adjustment
value can be selected.
Setting Adjustment value
W:P Preset value (3200K)
W:A The value stored in memory A
W:B The value stored in memory B
W:C The value stored in the memory cell that is called
up when memory A and memory B are turned off
from a remote control unit
At shipment, the gain is set to 0 dB, color temperature is
set to 5600K-OFF, and the white balance memory is set to
W:P.
For details on white balance adjustment, see "3-4 White
Balance Adjustment (in Custom mode)" (page 34).

3-2-6 Selection of a Lens File

This camera permits you to register the compensation data
for the mounted lens as a lens file in built-in memory (max.
32 files).
If a lens file for the mounted lens has already been
registered, select it on the subdisplay. The compensation
data that were adjusted for that lens will be invoked.
Lens file selection page
LENS:1
No Offset
On the first line, select the number of the lens file.
On the second line, the lens-file name corresponding to the
selected file is displayed.
The selected lens file will be retained until a new lens file
is selected. As long as the same lens is used, further
selection of the lens file is not required.
Note
All the lens files are named "No Offset," with all zero
settings at shipment. File registration and modification of
data in a lens file must be performed in Custom mode.
For details on the lens files, see "Chapter 5 Storage and
Retrieval of User Setting Data".
Basic Settings with the Subdisplay
31