Specifications; Camera Head - Sony F23 Operation Manual

Specifications

Camera Head

General
Power requirementsDC 10.5 to 17 V
Power consumption
Approx. 56 W with 23.98 PsF (not
including lens, viewfinder)
Operating temperature
0°C to +40°C (32°F to 104°F)
Storage temperature
–20°C to +60°C (–4°F to +140°F)
Mass Approx. 5 kg (11 lb) (camera head only)
Imager
Imager 2/3-type Progressive Interline CCD
Method 3-CCD, RGB
Aspect ratio 16:9
Effective resolution
1920 (horizontal) × 1080 (vertical)
Electrical characteristics
Sensitivity (at 2000 lx with 89.9% reflectivity)
T10 with 23.98 PsF (with BASE
SETTING>D-RANGE>NORMAL)
T11 with 23.98 PsF (with BASE
SETTING>D-RANGE>EXTEND)
ISO sensitivity ISO 400 (with BASE SETTING>
D-RANGE>NORMAL)
ISO 530 (with BASE SETTING>
D-RANGE>EXTEND)
Registration 0.02% for total area (not including lens
distortion)
Geometric distortion
Negligible (not including lens
distortion)
Horizontal resolution
1000 TV lines (at center of screen)
5% or higher modulation
Optical system specifications
Spectral system F1.4 prism
Built-in filters
Color temperature conversion filters
3200K, 4300K, 5600K, 6300K, ND0.3
1
( / ND)
2
ND filters Clear, ND0.6 (
ND1.8 (
1 1
/ ND), ND1.2 ( / ND),
4 16
1
/ ND), CAP
64
Input/output connectors
DC IN LEMO 8-pin male (1), DC 10.5 to 17 V,
20 to 30 V
DC OUT 12 V: 11-pin (1), DC 12 V, 4 A
maximum
24 V: 3-pin (1), DC 24 V, 5.5 A
maximum
(The usable current may be limited
depending on the load and input
conditions.)
VF1, VF2 20-pin (1 each)
LENS 12-pin (1)
TEST OUT BNC type (1), VBS/HD Y
MONITOR OUT HD SDI
4:2:2, BNC type (2)
GENLOCK IN BNC type (1)
REMOTE 8-pin (1)
EXT I/O LEMO 5-pin, female (1)
(network) RJ-45 type (1), 10BASE-T, 100BASE-
TX
Supplied accessories
Interface box (1)
Assistant panel (1)
Assistant panel cable (1)
Assistant panel hanger (1)
+B4×8 screws (4)
Center handle (1)
L handle (1)
Riser plate (1)
Power cable connector (LEMO 8-pin) (1)
Operation manual (1)
95
Specifications