Sony EVI-H100S Technical Manual page 5

EVI-H100V
1) When the camera is connected to a computer with a VISCA cable (cross type, RS-232C), you can operate the
camera with the computer. To obtain a cable, consult the dealer where you bought your camera.
2) For details on how to connect using VISCA RS-422, see page 28.
Notes
 Use only the AC power adaptor (JEITA type4)
supplied with the unit. Do not use any other AC
power adaptor.
Polarity of the plug
to VIDEO OUT
to VIDEO OUT
VISCA cable (not supplied)
to VISCA IN
to VISCA OUT
to VISCA RS-422
to DC 12V
to component
DVI to
input
component
connector
adapter cable
(not supplied)
DVI cable
(not supplied)
to DVI input connector
1)
to RS-232C
To VISCA IN of other
EVI-H100S/H100V
(when connecting
Computer with serial
communication
to more than one
interface, HD video
camera)
monitor with DVI input
interface, etc.
2)
AC power adaptor (supplied)
Power cord (supplied)
 You have to set the video format of the signal to be
output from the camera. For detailed information on
how to set the video format, see " SYSTEM
SELECT switch" on page 7.
 Do not make VISCA RS-232C and RS-422
connections at the same time, as this may cause
malfunctions.
to AC outlet