Fujitsu M4099D Operator's Manual page 54

Paper length check
This function sets and detects a difference in paper length. You cannot change settings if they are set
by the host computer.
LCD display
Paper Length Check
The following is an example of operation when you use this function.
1. In <<SETUP MODE>> initial screen, press
.
ENTER
The <<SETUP MODE>> menu screen
(Settings) appears.
NOTE
The "Settings" screen does not appear and
the "Paper Length Check" screen first ap-
pears when your scanner is not controlled
through the video or TP interface.
2. When the menu screen indicates "Settings",
press .
The <<SETUP MODE>> menu screen (Paper
Length Check) appears.
3. Press .
ENTER
The option select screen indicates the current
options with ON blinking (blinking indicates
"changeable").
Options
On, Off (Default: Off)
10 mm, 15 mm, 20 mm (Default: 10 mm)
Remarks
Checked or not
Difference:
XX mm means that it is not regarded as an
error when the actual difference of paper length
is within the limits of XX mm.
<<SETUP MODE>>
<<SETUP MODE>>
Settings
<<SETUP MODE>>
Paper Length Check
Paper Length Check
ON 10 mm
6-9