Fujitsu M4099D Operator's Manual page 64

The following is an example of operation when you use this function.
1. In <<SETUP MODE>> initial screen, press
.
ENTER
The <<SETUP MODE>> menu screen
(Settings or Paper Length Check) appears.
NOTE
The "Settings" screen does not appear and
the "Paper Length Check" screen first ap-
pears when your scanner is not controlled
through the video or TP interface.
2. Press repeatedly until "Paper Separation
Level" appears in the lower line of the menu
screen.
3. Press .
ENTER
The option select screen appears with the
current option Normal blinking (blinking
indicates "changeable").
4. Press or
The displayed option changes (Thick to Thin).
5. When the desired option appears, press
to save the change.
ENTER
The LCD returns to the <<SETUP MODE>>
menu screen (Paper Separation Level).
6. Press two times.
CANCEL
The LCD returns to the Ready screen.
.
<<SETUP MODE>>
<<SETUP MODE>>
Settings
<<SETUP MODE>>
Paper Length Check
<<SETUP MODE>>
Paper Separation Level
Paper Separation Level
Normal
Paper Separation Level
Medium Thin
<<SETUP MODE>>
Paper Separation Level
Ready
6-19