Fujitsu M4099D Operator's Manual page 62

The following is an example of operation when you use this function.
1. In <<SETUP MODE>> initial screen, press
.
ENTER
The <<SETUP MODE>> menu screen (Settings
or Paper Length Check) appears.
NOTE
The "Settings" screen does not appear and the
"Paper Length Check" screen first appears when
your scanner is not controlled through the video
or TP interface.
2. Press repeatedly until "Hopper Height"
appears in the lower line of the menu screen.
3. Press .
ENTER
The option select screen appears with the current
height setting 1000 sheets blinking (blinking
indicates "changeable").
4. Press .
The hopper moves to the 500-sheet position and
the new height setting 500 sheets blinks.
NOTE
Each time you press
moves to the next position and its position is
automatically saved. Repeat this operation until
the hopper is positioned at the desired height.
If an error occurs during positioning, press
. The LCD returns to the option select
CANCEL
screen. Repeat step 4.
or , the hopper
<<SETUP MODE>>
<<SETUP MODE>>
Settings
<<SETUP MODE>>
Paper Length Check
<<SETUP MODE>>
Hopper Height
Hopper Height
1000 sheets
Hopper Height
500 sheets
6-17