Fujitsu M4099D Operator's Manual page 65

Drop-out color
This function sets a drop-out color for front and back sides of paper respectively. You cannot change
settings if they are selected by the host computer.
LCD display
Drop-out Color
The following is an example of operation when you use this function.
1. In <<SETUP MODE>> initial screen, press
.
ENTER
The <<SETUP MODE>> menu screen
(Settings or Paper Length Check) appears.
NOTE
The "Settings" screen does not appear and
the "Paper Length Check" screen first ap-
pears when your scanner is not controlled
through the video or TP interface.
2. Press repeatedly until "Drop-out Color"
appears in the lower line of the menu screen.
3. Press
ENTER
The option select screen appears with the
current setting Green (for Front) blinking
(blinking indicates "changeable").
4. Press .
Green (current option for Back) blinks (blink-
ing indicates "changeable").
6-20
Options
Front: Green, Red, Blue (Default: Green)
Back: Green, Red, Blue (Default: Green)
.
Remarks
<<SETUP MODE>>
<<SETUP MODE>>
Settings
<<SETUP MODE>>
Paper Length Check
<<SETUP MODE>>
Drop-out Color
Drop-out Color
Front: Green Back: Green
Drop-out Color
Front: Green Back: Green