Installing The Snc Audio Upload Tool; Connecting The Camera To The Computer - Sony Ipela SNC-ER585 User Manual

Installing the SNC audio upload
tool
1
Insert the CD-ROM in your CD-ROM drive.
A cover page appears automatically in your Web
browser.
If it does not appear automatically in the Web
browser, double-click on the index.htm file on the
CD-ROM.
When you are using Windows Vista or Windows 7,
pop-up "Auto Play" may appear. For details,
"Installing software" in "When using Windows
Vista" on page 11 or "Installing software" in
"When using Windows 7" on page 14.
2
Click the Setup icon of SNC audio upload tool.
The "File Download" dialog opens.
When you are using Windows XP Service Pack 2 or
later, Windows Vista or Windows 7, a message
regarding the active contents may appear. For
details, see "Installing software" in "When using
Windows XP Service Pack 2 or later" on page 9,
"Installing software" in "When using Windows
Vista" on page 11 or "Installing software" in
"When using Windows 7" on page 14.
3
Click Open.
Note
If you click "Save this program to disk" on the "File
Download" dialog, you cannot install the tool
correctly. Delete the downloaded file, and click the
Setup icon again.
4
Install the SNC audio upload tool following the
wizard displayed.
If the Software License Agreement is displayed,
read it carefully and accept the agreement to
continue with the installation.
Connecting the Camera to the
Computer
1
Connect a speaker to the 5 (line output) jack on the
camera.
2
Connect a microphone to the microphone input jack
on the computer.
Note
If the microphone input jack of the computer is not set
correctly, no sound is transmitted from the computer and
nothing is output from the speaker connected to the
camera.
Check on the control panel of Windows.
On Windows XP
1
Select Sounds and Audio Device from Control
Panel.
2
Click Volume in the Sound Recording section on
the Audio tab.
The Recording Control window opens.
3
Check Select in the Microphone section.
On Windows Vista or Windows 7
There are no settings regarding the microphone jack.
If recording cannot be made, connect a microphone
device to the computer and check that the recording
device operates correctly, as follows:
1
Select Sound from Control Panel.
2
Open the Recording tab and check that Windows has
recognized the hardware correctly.
Using the SNC audio upload tool — Transmitting Audio to Camera
113