Using The Snc Audio Upload Tool - Transmitting; Audio To Camera; Installing The Snc Audio Upload Tool; Connecting The Camera To The Computer - Sony SNC-M1 User Manual

Using the SNC audio
upload tool

Audio to Camera

The supplied SNC audio upload tool allows you to
transmit sound from the computer to the camera.
This section explains the setup and operations of the
SNC audio upload tool.
The SNC audio upload tool supports the following audio
data to be transmitted.
Audio CODEC
G.726
G.726
G.726
G.726
Note
Only one administrator can transmit sound to the
camera. Meanwhile, other users with administrator ID
and a password will not be able to transmit sound to the
camera.
Installing the SNC audio upload
tool
1
Insert the supplied CD-ROM disc into your
computer CD-ROM drive.
After a short time a window will open displaying
the files on the CD-ROM.
2
Click the Setup icon of SNC audio upload tool.
The "File Download" dialog opens.
3
Click Open.
Note
If you click "Save this program to disk" on the "File
Download" dialog, you cannot install correctly.
Delete the downloaded file, and click Setup icon
again.
4
Install the SNC audio upload tool following the
wizard displayed.
If the Software License Agreement is displayed,
read it carefully and accept the agreement to
continue the installation.
40
Using the SNC audio upload tool — Transmitting Audio to Camera
— Transmitting
Transmission rate
40 kbps
32 kbps
24 kbps
16 kbps
Connecting the Camera to the
Computer
1
Connect a speaker to the 5 (line output) jack on the
camera.
2
Connect a microphone to the microphone input jack
on the computer.
Note
If the microphone input jack of the computer is not set
correctly, no sound is transmitted from the computer and
nothing is output from the speaker connected to the
camera.
Set the microphone input jack from the control panel of
Windows.
On Windows 2000
1
Select Sounds and Multimedia from Control Panel.
2
Click Volume in the Sound Recording section on
the Audio tab.
The Recording Control window opens
3
Check Select in the Microphone section.
On Windows XP
1
Select Sounds and Audio Device from Control
Panel.
2
Click Volume in the Sound Recording section on
the Audio tab.
The Recording Control window opens.
3
Check Select in the Microphone section.