Device Restart And Initialization; Using The Snc Audio Upload Tool; Installing The Snc Audio Upload Tool; Connecting The Camera To The Computer - Sony Ipela Application Manual

Select a subcategory to display setting items on the right
side of the screen.
Item
Displays the setting items. Select a line to change its
value.
Value
Displays the value of an item. Select or enter a value to
change the value.
Explanation
Displays the range of value for setting and
supplementary explanations.
OK
Apply the setting and close the Device Setting screen.
The main screen of SNC Toolbox is displayed.
Cancel
Close the Device Setting screen without changing the
setting. The main screen of SNC Toolbox is displayed.
Apply
Apply the setting.
Other settings
See User's Guide for configuring the settings.

Device restart and initialization

You can restart and initialize (restore factory default) a
selected device. Multiple devices can be selected
simulteneously for restart and initialization.
Restarting a device
Click Tools, Initialize Device and Reboot in this order
on the menu bar to restart the device.
Initializing a device
Click Tools, Initialize Device and Factory Default in
this order on the menu bar to initialize the device
(restore factory default).
Using the SNC audio
upload tool
The SNC audio upload tool allows you to transmit sound
from the computer to the camera.
This section explains the setup and operations of the
SNC audio upload tool.
The SNC audio upload tool supports the following audio
data to be transmitted.
Audio CODEC Transmission rate
G.711 (µ-LAW) 64 kbps
G.726 40 kbps
G.726 32 kbps
G.726 24 kbps
G.726 16 kbps
Notes
• Only one user can transmit sound to the camera.
Meanwhile, another user will not be able to transmit
sound to the camera.
• If proxy server is enabled, sound uploading to the
camera may fail. In that case, disable the proxy server.
• SNC audio upload tool may not operate correctly if
personal firewall software or antivirus software is used
in your computer. In this case, disable the
corresponding software.
• If you are using Windows XP Service Pack 2 or later,
Windows Vista or Windows 7, disable the Windows
Firewall function. Otherwise SNC audio upload tool
will not operate correctly. For the setting,
"Configuring Windows Firewall" in "When using
Windows Vista" on page 22 or "Configuring Windows
Firewall" in "When using Windows 7" on page 21.
Installing the SNC audio upload
tool
Install the SNC audio upload tool following the wizard
displayed.
If the Software License Agreement is displayed, read it
carefully and accept the agreement to continue with the
installation.
Connecting the Camera to the
Computer
1
Connect a speaker to the 5 (line output) jack on the
camera.

Using the SNC audio upload tool

15