Shield Controller Ass'y - Dell 1815 Mono Laser Service Manual

Precautions

5.10 Shield Controller Ass'y

1. Before you remove the Shield Controller Ass'y, you
should remove:
- Rear Cover (Refer to 5.4)
- Side Cover Left (Refer to 5.6.4)
2. Unplug the all connectors and remove the one screw
securing the Ground Cable.
3. Remove the five screws securing the Shield Controller
Ass'y and remove it.
Service Manual
5-18
Shield Controller Ass'y
4. Remove the three screws securing the Main PBA to
the Bracket and unplug the Film Cable and then
remove the Main PBA.
Main PBA
Film Cable
Shield
5. The connectors are located, as shown below.
Flat Cover
CCD
ADF Flat Motor
USB
Line
Network
USB
Tray2
Modem PBA
OPE Panel
USB Host
Cartridge
LSU_5V
LSU
Thermo
MPF_SEN
MPF
REGI
Pick Up
BLDG
Engine
Duplex Motor