Connection Pcb - Dell 1815 Mono Laser Service Manual

5.14 Connection PCB

1. Before you remove the Connection PCB, you should
remove:
- Rear Cover (Refer to 5.4)
- Side Cover Right (Refer to 5.6.3)
2. Unplug the all connectors.
Connection
PCB
3. Remove the two screws securing the Connection
PCB and remove it.
4. The connectors are located, as shown below.
Duplex
Motor
Connection
PCB
Precautions
FAN Duplex Exit Motor
Fan Main
HVPS
Service Manual
5-23