Stains On The Front Of The Page - Dell 1815 Mono Laser Service Manual

Service manual
Hide thumbs Also See for 1815 Mono Laser:
Table of Contents

Advertisement

7.3.11 Ghost (3)
White ghost occurs in the black image printing at 35.2 mm intervals.
• Description
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer
7.3.12 Ghost (4)
Ghost occurs at 77.8 mm intervals.
• Description
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer

7.3.13 Stains on the front of the page

The background on the face of the printed page is stained.
• Description
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Check and Cause
1. The life of the developer may be expired.
2. The abnormal voltage and bad contact of
the terminal of the supply roller
Check and Cause
The temperature of the fuser is maintained
high.
Check and Cause
1. Toner leakage due to improperly sealed
developer.
2. If the transfer roller is contaminated, stains
on the face of page will occur.
Solution
1. Problem in the toner cartridge, replace the
toner cartridge and try to print out.
2. Check the approved voltage of the supply
roller and contact of the terminal and adjust
if necessary.
Solution
1. Disassemble the fuser and remove the
contaminated toner particles on the roller
and clean the foreign matter between
Thermistor and Heat roller.
(
Caution: can be deformed)
Solution
1. Replace the toner cartridge.
2. If the transfer roller is contaminated, run PC
Cleaning Mode Print 2 or 3 times.
And perform Self-T est 2 or 3 times to
remove contamination.
Troubleshooting
Service Manual
7-15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1815dn

Table of Contents