Units; Language Preference; Pdl (Page Description Language); Pdl Options - Kyocera TASKalfa 3051ci User Manual

Device Settings

Units

Selecting a Unit of Measurement
1
2

Language Preference

Setting Language Preference
1
2

PDL (Page Description Language)

PDL Options

3-15
You can set Inches or Millimeters as the unit of measurement. This is used for
the following settings:
Custom page size setting in the Page Sizes dialog box in the Basic tab.
Spacing setting in the Add Watermark and Edit Watermark dialog boxes in
the Advanced tab.
Poster settings in the Layout tab.
Gutter settings in the Layout or Finishing tab.
Index tab dividers settings in the Publishing tab.
In Device Settings > User, select Inches or Millimeters.
Click OK in the User Settings and Properties dialog boxes.
The Language preference option specifies the user interface language of
Device Settings in Properties and all tabs of Printing Preferences.
Available languages vary depending on your locale and your computer settings.
In Device Settings > User, select the desired language from the Select
language list.
Click OK in the User Settings and Properties dialog boxes.
A Page Description Language (PDL) specifies the contents and layout of a
printed page. In Device Settings, you can choose from PCL XL, (Printer
Command Language XL), PCL 5c, KPDL (an emulation of PostScript printing),
or PDF (Portable Document Format). To add PDF to the list of PDL choices, you
must install the Output to PDF plug-in. The printer default is PCL XL, which is
suitable for most printing purposes.
After you select a PDL, the selection appears in the lower corner of the overview
image in Device Settings and in all Printing Preferences tabs. You can
change the PDL temporarily from any Printing Preferences tab.
In GDI compatible mode, vector graphics are rasterized for printing as bitmap
images. Use the GDI compatible mode option to improve the output quality of
the graphic created by the application.
In a client/server environment, this feature is unavailable to a client logged in as
a restricted user.
If your application supports the XML Print Specification, then XPS printing can
be performed after installing the XPS driver. With the XPS driver, the only
available PDL is XPS.
The PDL options, available in the PDL Settings dialog box, are accessed in
Device Settings.
User Guide