Maytag MEDB700BW Use And Care Manual page 10

5.
Adjust cycle modifiers, if desired
Steam model shown
You may adjust different settings, depending on whether you
have selected a Sensor Cycle, Timed Cycle, or Steam Cycle.
See the "Cycle Guide" for detailed information.
NOTE: Not all options and settings are available with all cycles.
Not all cycles are on all models.
Sensor Cycles:
You can select a different Dryness Level, depending on your
load, by pressing the Dryness Level button. Selecting Very,
More, Normal, Less, or Damp automatically adjusts the
Dryness Level at which the dryer will shut off. Once the
Dryness Level is set, it cannot be changed without stopping
the cycle.
Sensor cycles give the best drying in the shortest time.
Drying time varies based on fabric type, load size, and
dryness setting.
Timed Cycles:
When you select a Timed Cycle, the
default time appears in the display. Use
the + and - buttons to increase or decrease
the time in 1 minute increments. Press
and hold to change the time in 5 minute
increments.
The default temperature may be changed
by pressing the Temp Level button until the
desired dry temperature is lit.
Steam Cycles:
Auto Refresh with Steam:
Reduces odors and light wrinkles from small to medium-sized
loads of dry items. Dry time will automatically adjust when
the load size is sensed. Medium or High Temp Levels may be
selected.
Custom Refresh with Steam:
This cycle is best for reducing wrinkles and odors from dry
garments. Select the number of garments to be refreshed.
Cycle time will increase depending on number of garments
selected.
6.
Select any additional options
Steam model shown
Add additional options such as Reduce Static, Wrinkle Prevent,
Wrinkle Prevent with Steam and/or Steam Boost
by pressing the button for that option.
NOTE: Not all options and settings are available with all cycles.
10
7.
Press START/PAUSE to begin cycle
Press and hold the START/PAUSE button to begin the cycle.
8.
Remove garments promptly
after cycle is finished
Steam model shown
Promptly remove garments
after cycle has completed to
reduce wrinkling. If you will
be unable to remove the load
promptly, select the Wrinkle
Prevent/Wrinkle Prevent with
Steam option before pressing
Start/Pause.
Changing the Sensor Cycle settings
to increase drying time
If all your loads on all Sensor Cycles are consistently not
as dry as you would like or are too dry, you may change the
default settings to increase or decrease the default dryness
level.
Your sensor drying settings can be adjusted to adapt to
different installations, environmental conditions or personal
preference. This change is retained and will affect all of your
sensor cycles, not just the current cycle/load.
There are 5 drying settings, they will appear in the time
display:
01 Factory preset dryness level.
02 Slightly drier clothes, 15% more drying time.
03 Much drier clothes, 30% more drying time.
04 Much damper clothes, 30% less drying time.
05 Slightly damper clothes, 15% less drying time.
To change the drying settings:
NOTE: The settings cannot be changed while the dryer
is running or paused. The dryer must be in standby mode
(the Power button is off) to adjust the default settings.
1. Before starting a cycle, press and hold the Dryness
Level button for 6 seconds.
2. Press the Dryness Level button to select the dryness
level shown in the time display: 01, 02, 03, 04, or 05.
3. Press START/PAUSE to save the new dryness level
setting.
Non-steam
Steam model
model