Right Side Frame - Lexmark 10G1664 - T 634dtnf B/W Laser Printer Service Manual

4060-xxx

Right side frame

CAUTION: Unplug the printer before you begin.
1.
Remove the right side cover. See
2.
Remove the laser cover. See
3.
Remove the LVPS. See
4.
Remove the multipurpose tray assembly.
5.
Disconnect the autocompensator arm bias spring from the right side frame.
6.
Remove the toner sensor mounting screw (A), disconnect the sensor cable and remove the
toner sensor.
7.
Remove the smart cartridge contact assembly mounting screw (C)
8.
Remove the right side frame mounting screws (B) and remove the right side frame.
CAUTION: Be sure the fuser assembly has cooled before working on any of the fuser FRUs.
4-22
Service Manual
"Right cover removal" on page
"Laser cover removal" on page
"Low voltage power supply removal" on page
A(102) C
4-10.
4-14.
B(102)
B(102)
4-42.