Table of Contents
Advertisement
4077-001
Rear Cover Removal
1. Remove the front cover.
2. Place a screwdriver in slot [A] and release the cover latches.
A
3. Slide the cover up and off the machine.
4. To reassemble, place the cover over the tabs in the bottom cover
and press down until the cover latches. Be sure the parallel
connector snaps do not get trapped behind the cover.
Right Side Frame Assembly Removal
1. Remove the front cover.
2. Remove the rear cover.
3. Remove the carrier frame assembly.
4. Remove the paper load door and manual insert tray.
5. Remove the two screws securing the right side frame to the back
plate. Slide the right side frame off the back plate. Note the
relationship of the parts.
45
A
Advertisement
Table of Contents
