Integrated Tray Autocompensator Assembly Removal - Lexmark 10G1664 - T 634dtnf B/W Laser Printer Service Manual

Integrated tray autocompensator assembly removal

1.
Remove the paper tray.
2.
Remove the left door.
3.
Remove the outer shield. See
4.
Disconnect the autocompensator motor cable from the system board (J28).
5.
Cut cable tie (A) on left side.
6.
Place the printer on its back.
"Outer shield removal" on page
A
4060-xxx
4-52.
Repair information
4-35