Supporting Power Saving On A Display; Suspend Functions (Windows 95 Models); Power Saving Function; Replacing A Display - Fujitsu DESKPOWER 6000 User Manual

Supporting power saving on a display

For Windows 95 models:
To use a display non-supporting the power saving function, open "Display Detailed
Properties" on the "Screen Properties" and check off the "Power Saving Display" with the
"Monitor" tab.
Windows 98 models:
To use a display non-supporting the power saving function, set "None" to both "System
Standby" and "Turning off the Monitor" in the "Power Supply Control Properties".

Suspend functions (Windows 95 models)

To use the suspend function, install the display driver from the device driver CD included.

Power saving function

If the power saving function operates when using the following files, the application
operation becomes unstable. To use the following, disable the power saving function.
- Each file in the Wave/AFI/MPEG/DAT format
- Music CD

Replacing a display

When replacing a display with a display having different specifications (particularly liquid-
crystal display), a display error (such as no image on the screen) may occur.
When replacing a display, reset the settings of the resolution and refresh rate to the
factory-set settings.
- Resolution :
- Refresh rate :
If no image is displayed on the screen or a resolution that cannot be displayed is found by
replacing a display without setting the above, reinstall the display driver as follows.
1
Start Windows in the Safe Mode.
2
Set the Graphic adapter to "Standard VGA," then restart the system.
3
Reinstall the display driver.
800 x 600
Optimum (Windows 95/98 models) or 60 Hz (Windows NT models)
93