LAN adapter specifications
LAN controller
Send and receive buffer
RAM
External interface
Transmission media
Transmission method
Access method
Data transfer speed
Wiring mode
Maximum segment
length
Maximum number of
nodes/segment
*1
To successfully operate the network at 100 Mbps, use an unshielded twisted pair cable
(UTP) with a data grade of category 5 or higher. If a cable classified as category 3 is
used, data is lost.
*2
The hub unit is a concentrator of 100BASE-TX/10BASE-T.
Sound specifications
Product name
MPU-401
Joystick
Interrupt
request level
Sampling rate
- The factory-set IRQs and I/O port addresses of the PC have been set to the
value in < > in the above table.
- Although "Joystick" is displayed in the device manager of Windows 95/98, it
cannot be used with this PC because the joystick connector is not provided in
your PC.
Intel S82559
3 kB each for send and receive
ISO8802-3 100BASE-TX/10BASE-T
1
Twisted pair cable*
(100 Mbps: Category 5, 10 Mbps: Categories
3 to 5)
Base band
CSMA/CD
100Mbps, 10Mbps
Star type
100m
Depends on the hub unit*
Manufactured by Crystal
300h-301h to <330h-331h> to 3FEh-3FFh
<200h-207h>, 208-20Fhl)
IRQ <5>, 7, 9, 11, 12, 15
5 to 48 kHz
2
83