Exit Discarding Changes; Load Setup Defaults; Discard Changes; Save Changes - Fujitsu DESKPOWER 6000 User Manual

Exit Discarding Changes

This item exits the BIOS setup utility without saving changes to the CMOS RAM and
reboots the computer. All changes are discarded. If the Enter key is pressed while
changing setup values, the message shown below is displayed. To discard changes,
select [No] and press the Enter key.
Setup Confirmation
Configuration has not been saved!
Save before exiting?
[Yes]

Load Setup Defaults

This item loads default values to all setup items. Press the Enter key to display the
message shown below. Select [Yes] and press the Enter key.
Setup Confirmation
Load default configuration now?
[Yes]

Discard Changes

This item loads values before change from the CMOS RAM to all setup items and discards
all changes. Press the Enter key to display the message shown below. Select [Yes] and
press the Enter key.
Setup Confirmation
Load previous configuration now?
[Yes]

Save Changes

This item saves changes to the CMOS RAM. Press the Enter key to display the message
shown below. Select [Yes] and press the Enter key.
Setup Confirmation
Save configuration changes now?
[Yes]
66
[No]
[No]
[No]
[No]