Canon 2711B019AB Basic Operation Manual page 211

Error Messages
Message
PAPER JAM
PAPER JAM
OPEN REAR COVER
PLEASE WAIT
REMOVE MP PAPER
SET PAPER AGAIN
SET TONER AGAIN
SYSTEM ERROR
EXXX
WRONG PASSWORD
11-18
Description
Paper jams have occurred in the machine.
<LIFT PANEL TO OPEN/OPEN TONER COVER>
appears alternately.
Paper jams have occurred in the machine.
<LIFT PANEL TO OPEN/OPEN TONER COVER>
appears alternately.
This message appears when turning on the
main power switch, or when the machine is
not ready for printing.
Paper is loaded in the multi-purpose tray.
Paper is not loaded properly, or the toner
cartridge is not set.
A system error has occurred. <XXX> will be
a three-digit code that indicates a particular
type of error.
The memory lock reception password or
system password you entered is incorrect.
Action
Clear the paper jam (See "Clearing Jams,"
on p. 11-2) and reload paper in the paper
cassette or multi-purpose tray. The cover
must be opened and closed to resume the
current job.
Clear the paper jam (See "Clearing Jams,"
on p. 11-2) and reload paper in the paper
cassette or multi-purpose tray. The cover
must be opened and closed to resume the
current job.
Wait until the message disappears.
Remove the paper from the multi-purpose
tray. The machine will not print faxes, reports,
or lists when paper is loaded in the multi-
purpose tray. They will be stored in memory.
Load paper properly. (For instructions on how
to load paper in the paper cassette or multi-
purpose tray, see "Loading Paper," on p. 2-8.)
Set the toner cartridge in the machine (see
"Set Up the Machine," in the Starter Guide).
Turn OFF the main power switch, wait for
more than 5 seconds, then turn it ON again.
If the message persists, turn OFF the main
power switch, disconnect the power cord,
and contact your local authorized Canon
dealer or the Canon help line.
Enter the correct password. For details, see
"Receiving Documents in Memory without
Printing Out (Memory Lock Reception)," on
p. 5-44 or "Security," in the e-Manual.