Chassis Cluster - Dell PowerConnect J-8208 Release Note

Junos 10.3 OS Release Notes
8

Chassis Cluster

Removing Control VLAN 4094 in Chassis Cluster— For J-SRX Series branch devices
(J-SRX100, J-SRX210, and J-SRX240), the existing virtual LAN (VLAN) tag used for
control-link traffic will be replaced with the use of experimental Ether type 0x88b5.
However, backward compatibility is also supported for devices that have already
deployed chassis cluster with VLAN tagging in place.
To toggle between VLAN and Ether type modes, use the following command:
set chassis cluster control-link-vlan enable/disable
NOTE: You must perform a reboot to initialize this configuration change.
To show whether control port tagging is enabled or disabled, use the following
command:
set chassis cluster information
To view the chassis cluster information, use the following command:
show chassis cluster information
user@host > show chassis cluster information
The following is a sample output of the command:
node0
-----------------------------------------------------
Control link statistics:
Control link 0:
Fabric link statistics:
Probes sent: 1248
Sequence number of last probe received: 0
Chassis cluster LED information:
Current LED color: Green
Control port tagging:
Cold Synchronization:
In a chassis cluster configuration on a J-SRX100, J-SRX210, or J-SRX240 device, the
default values of the
heartbeat-threshold
hierarchy are 8 beats and 2000 ms, respectively. These values cannot
chassis cluster]
be changed on these devices.
Disabled
and
heartbeat-interval
options in the
[edit