System Hierarchy; Gateways; Appsecure; Chassis Cluster - Dell PowerConnect J-8208 Release Note

Release notes junos version 10.3
Hide thumbs Also See for PowerConnect J-8208:
Table of Contents

Advertisement

Junos 10.3 OS Release Notes
Related
Documentation
Known Limitations in Junos OS Release 10.3 for J-SRX Series Services Gateways
24
set snmp logical-system-trap-filter
set snmp trap-options logical-system
set snmp trap-group d1 logical-system

System Hierarchy

On J-SRX100, J-SRX210, and J-SRX240 devices, the following system hierarchy CLI
commands are not supported. However, if you enter these commands in the CLI editor,
they appear to succeed and do not display an error message.
set system diag-port-authentication
New Features in Junos OS Release 10.3 for J-SRX Series Services Gateways on page 4
Issues in Junos OS Release 10.3 for J-SRX Series Services Gateways on page 29
Errata and Changes in Documentation for Junos OS Release 10.3 for J-SRX Series
Services Gateways on page 42

AppSecure

Junos OS Application Identification—When you create custom application or nested
application signatures for Junos OS application identification, the order value must be
unique among all predefined and custom application signatures. The order value
determines the application matching priority of the application signature.
The order value is set with the
application-name signature order
values by entering the
show services application-identification | display set | match order
command. You will need to change the order number of the custom signature if it
conflicts with another application signature.

Chassis Cluster

J-SRX100, J-SRX210, and J-SRX240 devices have the following chassis cluster
limitations:
Virtual Router Redundancy Protocol (VRRP) is not supported.
In service software upgrade (ISSU) is not supported.
The 3G dialer interface is not supported.
On J-SRX Series device failover, access points on the Layer 2 switch reboot and all
wireless clients lose connectivity for 4-6 minutes.
On VDSL mini-PIM, chassis cluster is not supported for both VDSL and ADSL mode.
Queuing on aggregated Ethernet (
set services application-identification application
command. You can also view all signature order
) interface is not supported.
ae

Advertisement

Table of Contents
loading

Table of Contents