Table of Contents
Advertisement
This section lists the Z9432F-ON switch specifications.
CAUTION:
Operate the product at an ambient temperature not higher than 45°C (113°F).
NOTE:
For RoHS information, see
Topics:
•
Chassis physical design
•
IEEE standards
•
Agency compliance
•
USA Federal Communications Commission statement
•
European Union EMC directive conformance statement
•
Japan VCCI compliance for class A equipment
•
Safety standards and compliance agency certifications
•
Electromagnetic compatibility
•
Product recycling and disposal
Chassis physical design
Table 5. Chassis physical design
Parameter
Height
Width
Depth
Chassis weight with factory-installed components
Rack clearance required
Table 6. Environmental parameters
Parameter
Operating temperature
Operating humidity
Storage temperature
Storage humidity
Maximum thermal output
Restricted Material
Compliance.
Specifications
43 mm (1.693 inches)
438.5 mm (17.26 inches)
550 mm (21.65 inches)
● PSU handle 29.3 mm (1.15 in)
● PSU latch 34.6 mm (1.37 in)
● Fan tray handle 25.0 mm (0.99 in)
● 11.78 kg (2 PSUs and 7 fans)
● 25.97 lbs (2 PSUs and 7 fans)
● Front: 12.7 cm (5 inches)
● Back: 12.7 cm (5 inches)
Specifications
0°C–45°C (32°F–113°F) continuously
5% – 90% (RH), noncondensing
-40°C–70°C (-40°F – 158°F)
5% to 90%, noncondensing
1362 W = 4647.3 BTU/Hr
Specifications
NOTE:
Reduce maximum temperature by 1°C/125 meters
(1°F/228 ft) above 950 meters (3,117 ft).
10
Specifications
47
Advertisement
Table of Contents
