set firewall family vpls filter
set firewall family mpls dialer-filter d1 term
Interfaces CLI Hierarchy
On all J-SRX100, J-SRX210, and J-SRX240 devices, the following interface hierarchy CLI
commands are not supported. However, if you enter these commands in the CLI editor,
they appear to succeed and do not display an error message.
Aggregated Interface CLI on page 19
ATM Interface CLI on page 19
Ethernet Interfaces on page 20
GRE Interface CLI on page 21
IP Interface CLI on page 21
LSQ Interface CLI on page 21
PT Interface CLI on page 21
T1 Interface CLI on page 22
VLAN Interface CLI on page 22
Aggregated Interface CLI
The following CLI commands are not supported. However, if you enter these commands
in the CLI editor, they appear to succeed and do not display an error message.
request lacp link-switchover ae0
set interfaces ae0 aggregated-ether-options lacp link-protection
set interfaces ae0 aggregated-ether-options link-protection
ATM Interface CLI
The following CLI commands are not supported. However, if you enter these commands
in the CLI editor, they appear to succeed and do not display an error message.
set interfaces at-1/0/0 container-options
set interfaces at-1/0/0 atm-options ilmi
set interfaces at-1/0/0 atm-options linear-red-profiles
set interfaces at-1/0/0 atm-options no-payload-scrambler
set interfaces at-1/0/0 atm-options payload-scrambler
set interfaces at-1/0/0 atm-options plp-to-clp
set interfaces at-1/0/0 atm-options scheduler-maps
Unsupported CLI Statements and Commands
19