Layer 2 And Layer 3 Protocols - Dell PowerConnect J-8208 Release Note

Junos 10.3 OS Release Notes
Related
Documentation
62
In the J-Web interface, in the OSPF Configuration page (Configuration > Routing >
OSPF), the Traceoptions tab in the Edit Global Settings window does not display the
available flags (tracing parameters). As a workaround, use the CLI to view the available
flags. [PR/475313: This issue has been resolved.]
In the J-Web interface, the OSPF Monitoring page might display an error message if
there are multiple interfaces or neighbors detected in an autonomous system.
[PR/502132: This issue has been resolved.]
On J-EX4200 switches, you might not be able to upgrade the switch to Junos OS
Release 10.3 using the J-Web interface from a release prior to Junos OS Release 10.2.
As a workaround, upgrade the switch using the CLI. [PR/509073: This issue has been
resolved.]
In the J-Web interface, the PoE configuration page and Monitoring PoE page might not
display in the Microsoft Internet Explorer Web browser version 7. [PR/516048: This
issue has been resolved.]
In the J-Web interface, when you are assigning interfaces to a VLAN using the in-band
management option, EZSetup might display only interfaces in which transceivers have
been inserted. [PR/521632: This issue has been resolved.]
If RIP, BGP, OSPF, and DHCP are not configured on a switch, the "feature not configured"
validation message masks the
the Mozilla Firefox Web browser. As a workaround, refresh the J-Web interface.
[PR/528346: This issue has been resolved.]
In the J-Web interface when you select
MAC learning log might not display information. [PR/535200: This issue has been
resolved.]
J-EX Series Ethernet switches do not support the J-Web interface. [PR/561871: This
issue has been resolved.]
J-EX4200 switches with an SFP+ line card installed do not properly display the J-Web
dashboard chassis view. [PR/564307: This issue has been resolved.]

Layer 2 and Layer 3 Protocols

If a J-EX8200 switch receives an IGMP packet of unknown type, the switch might flood
the packet on all interfaces, including the ingress interface from which the packet was
received. [PR/502248: This issue has been resolved.]
New Features in Junos OS Release 10.3 for J-EX Series Ethernet switches on page 52
Changes in Default Behavior and Syntax in Junos OS Release 10.3 for J-EX Series
Ethernet switches on page 54
Limitations in Junos OS Release 10.3 for J-EX Series Ethernet switches on page 54
Outstanding Issues in Junos OS Release 10.3 for J-EX Series Ethernet switches on
page 57
Errata in Documentation for Junos OS Release 10.3 for J-EX Series Ethernet switches
on page 63
Commit , Help , and Logout
Monitor > Switching > Ethernet Switching
menu options if you are using
, the