Advanced Routing; Static Routing - TP-Link TL-WR840N User Manual

Then you will go back to the Schedule Settings page and see the following list.

4.12 Advanced Routing

Figure 4-60 Advanced Routing Menu
There are two submenus under the Network menu (shown in Figure 4-60): Static Routing List
and System Routing Table. Click any of them, and you will be able to configure the
corresponding function.

4.12.1 Static Routing

Choose menu "Advanced Routing → Static Routing", and you can configure the static route in
the next screen, shown in Figure 4-61. A static route is a pre-determined path that network
information must travel to reach a specific host or network.
To add static routing entries, follow the steps below.
1. Click Add New... shown in Figure 4-61, you will see the following screen Figure 4-62.
2. Enter the following data.
TL-WR840N
Figure 4-61 Static Routing
Figure 4-62 Add or Modify a Static Route Entry
300Mbps Wireless N Router User Guide
- 66 -