TP-Link TL-WR840N User Manual page 21

User Name/Password - Enter the User Name and Password provided by your ISP.

These fields are case-sensitive. If you have difficulty with this process, please contact
your ISP.
Select Static IP if IP Address/ Subnet Mask/ Gateway and DNS server address have been
provided by your ISP. Then please enter server IP address or domain name provided by your
ISP, and also enter the corresponding parameters.
Select Dynamic IP if none of the above parameters are provided. Then you just need to enter
server IP address or domain name provided by your ISP.
2) If the connection type detected is PPTP, the next screen will appear as shown in Figure
3-8.Configure the following parameters and then click Next to continue.
TL-WR840N
Figure 3-7 Quick Setup – L2TP/Russia L2TP
- 12 -
300Mbps Wireless N Router User Guide