Reboot - TP-Link TL-WR840N User Manual

Click the Backup button to save all configuration settings as a backup file in your local

computer.
To upgrade the Router's configuration, follow these instructions.

• Click the Browse... button to locate the update file for the Router, or enter the exact path
to the Setting file in the text box.
• Click the Restore button.

Note:
The current configuration will be covered by the uploading configuration file. The upgrade process
lasts for 20 seconds and the Router will restart automatically. Keep the Router on during the
upgrading process to prevent any damage.

4.16.6 Reboot

Choose menu "System Tools → Reboot", you can click the Reboot button to reboot the Router
via the next screen.
Some settings of the Router will take effect only after rebooting, which include
• Change the LAN IP Address (system will reboot automatically).
• Change the DHCP Settings.
• Change the Wireless configurations.
• Change the Web Management Port.
• Upgrade the firmware of the Router (system will reboot automatically).
• Restore the Router's settings to factory defaults (system will reboot automatically).
• Update the configuration with the file (system will reboot automatically.
TL-WR840N
Figure 4-81 Backup & Restore Configuration
Figure 4-82 Reboot the Router
- 80 -
300Mbps Wireless N Router User Guide