TP-Link TL-WR840N User Manual page 78

Description - This is the information about the rules such as address range.

Egress bandwidth - This field displays the max and mix upload bandwidth through the WAN

port, the default is 0.
Ingress bandwidth - This field displays the max and mix download bandwidth through the

WAN port, the default is 0.
Enable - This displays the status of the rule.

Modify - Click Modify to edit the rule. Click Delete to delete the rule.

To add/modify a Bandwidth Control rule, follow the steps below.
Step 1: Click Add New... shown in Figure 4-65, you will see a new screen shown in Figure 4-66.
Step 2: Enter the information like the screen shown below.
Step 3: Click the Save button.
TL-WR840N
Figure 4-65 Bandwidth Control Rules List
Figure 4-66 Bandwidth Control Rule Settings
- 69 -
300Mbps Wireless N Router User Guide